SK Trade, sktrade.co.uk

Building Materials

Bricks for Blairgowrie, delivered to site

Bricks are fired clay or concrete masonry units; the UK standard size is 215 × 102.5 × 65 mm, which lays at about 60 bricks per square metre of single-skin wall.

Trades and homeowners in Blairgowrie can order bricks for delivery by sending a list, a drawing or just the sizes of the job.

Shrink-wrapped pallets of red and buff facing bricks on a building site

Your Blairgowrie delivery

Delivering to
Blairgowrie (Perth and Kinross)
Nearby (straight line)
Scone (12 mi), Perth (14 mi), Dundee (16 mi)
Delivery
Standard mainland delivery
How it arrives
Strapped packs, usually crane offload
Postcode districts
PH10, PH2, PH13
Daylight
About 6h 48m on the shortest day

Bricks available for Blairgowrie delivery

  • Special shapesBullnose, cant, coping and plinth bricks to finish sills, piers and wall tops.
  • Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.
  • Facing bricksWirecut, stock and handmade-style faces in reds, buffs, greys and multis for the outside skin.
  • Concrete bricksConsistent concrete units in standard and coloured finishes, useful for below-ground work.

Sizing your order

Take a garden wall in Blairgowrie 9 m long and 2.1 m high: 18.9 m². At 60 bricks per square metre plus 5% for cuts that is 1,191 bricks, roughly 3 packs of 500 depending on the maker, laid in about 1.12 tonnes of building sand and 11 bags of cement at a 1:4 mix. Try the brick calculator

Getting bricks onto your Blairgowrie site

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Blairgowrie is inside our standard mainland delivery area.

  • Give us the full postcode for the drop point; deliveries around PH10 are priced to the exact address.
  • Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Picking the right product

Matching an existing house

Bring us the brick name if you know it, or a clear photo of a cleaned face in daylight with a tape measure for scale. Size matters as much as colour: older imperial bricks are often slightly larger than 65 mm.

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or the council's building standards service may specify one.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Your questions answered

Can I add other materials to my Blairgowrie delivery?

Yes. Put everything on one list, from bricks to fixings and PPE, and we will price it as one delivery where the products can travel together.

How much mortar do 1,000 bricks need?

Roughly half a cubic metre of mixed mortar, which is about 1 tonne of building sand and 8 to 9 bags of cement at a 1:4 mix. Our brick calculator works it out for your wall.

How are bricks delivered?

In strapped packs on a flatbed lorry, normally unloaded by the lorry's crane. Tell us where the packs can go and whether there are overhead cables, low branches or soft ground.

Can you deliver bricks to a site with restricted access in Blairgowrie?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price