Building Materials
Damp Proofing & Membranes delivered to Blairgowrie
Damp proofing materials stop moisture rising or passing through a building: a damp-proof course (DPC) in the walls and a damp-proof membrane (DPM) under the floor.
We deliver damp proofing to sites, driveways and yards across Blairgowrie, from a single pallet for a small job to full loads for bigger builds.

Blairgowrie delivery at a glance
- Daylight
- About 6h 48m on the shortest day
- Delivering to
- Blairgowrie (Perth and Kinross)
- Postcode districts
- PH10, PH2, PH13
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Scone (12 mi), Perth (14 mi), Dundee (16 mi)
- How it arrives
- Rolls with a mixed load
What damp proofing can we deliver to Blairgowrie?
- Weep ventsFor drainage and ventilation at the base of cavities and over trays.
- Liquid DPM and tankingCoatings for screeds and below-ground walls.
- Radon barriersGas-resistant membranes for areas that need radon protection.
- DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
Working out quantities for your Blairgowrie job
An extension in Blairgowrie with 24 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 30 m² floor slab needs about 34.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.
Picking the right product
DPC width
Match the DPC width to the wall leaf so it runs the full width of the masonry.
Is radon protection needed?
Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; the council's building standards service will tell you what applies.
In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.
Before your Blairgowrie delivery arrives
Rolls are light enough to travel with a mixed load and are handed off at the kerb. Blairgowrie is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- On busy streets in Blairgowrie, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- Give us the full postcode for the drop point; deliveries around PH10 are priced to the exact address.
Your questions answered
How thick should a DPM be?
1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.
How soon can damp proofing be delivered in Blairgowrie?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
Do you supply cavity trays?
Yes, with stop ends and weep vents for openings and abutments.
Is there a minimum order for delivery to Blairgowrie?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Other towns near Blairgowrie
- Damp Proofing & Membranes in Scone
- Damp Proofing & Membranes in Perth
- Damp Proofing & Membranes in Dundee
- Damp Proofing & Membranes in Forfar
- Damp Proofing & Membranes in Monifieth
- Damp Proofing & Membranes in Crieff
Other materials for Blairgowrie sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
