Insulation & Drylining
Plasterboard delivery in Redhill
Plasterboard (drywall) is a gypsum core faced with paper, fixed to timber or metal framing to form walls and ceilings; the standard board is 2400 × 1200 mm in 9.5, 12.5 or 15 mm.
Whether it is a repair, an extension or a new build in Redhill, we can supply the plasterboard and deliver to site.

Your Redhill delivery
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Reigate (2 mi), Horley (5 mi), Caterham (5 mi)
- Delivering to
- Redhill, Surrey
- Postcode districts
- RH1, RH2, RH3
- Daylight
- About 7h 52m on the shortest day
- How it arrives
- Flat on bearers
Which plasterboard can you order in Redhill?
- Acoustic boardDenser board to reduce sound between rooms.
- Moisture-resistant boardFor bathrooms, kitchens and utility rooms.
- Standard plasterboardWallboard for walls and ceilings in 9.5, 12.5 and 15 mm.
- Thermal laminate boardPlasterboard bonded to insulation for dry-lining external walls.
- Tapered and square edgeTapered edge for taped joints; square edge for skimming.
Before your Redhill delivery arrives
Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Redhill is inside our standard mainland delivery area.
- Give us the full postcode for the drop point; deliveries around RH1 are priced to the exact address.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
Getting the right plasterboard
Tapered or square edge?
Tapered edge boards are for taping and jointing without a skim; square edge boards are normally skimmed.
Which board type?
Use moisture-resistant board in wet rooms, fire board where a fire rating is required, and acoustic board for quieter rooms. Building regulations or your design set the requirement.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Working out quantities for your Redhill job
A new 4.8 m partition 2.4 m high, boarded on both sides, is 23.04 m² of board: 9 sheets of 2400 × 1200 mm with 10% for cutting, and about 315 drywall screws. Try the plasterboard calculator
Ordering plasterboard for Redhill: FAQs
How many screws per board?
Around 30 to 40 drywall screws for a 2400 × 1200 board on a wall, with screws at about 300 mm centres.
How many plasterboards do I need?
Divide the wall or ceiling area by 2.88 m² (one 2400 × 1200 sheet) and add about 10 percent for cutting. Our plasterboard calculator also gives the screws.
Can you deliver plasterboard to a site with restricted access in Redhill?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Is there a minimum order for delivery to Redhill?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Nearby towns we deliver plasterboard to
- Plasterboard in Reigate
- Plasterboard in Horley
- Plasterboard in Caterham
- Plasterboard in Coulsdon
- Plasterboard in Banstead
- Plasterboard in Purley
More materials delivered to Redhill
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
