SK Trade, sktrade.co.uk

Insulation & Drylining

Plasterboard for Newark-on-Trent, delivered to site

Plasterboard (drywall) is a gypsum core faced with paper, fixed to timber or metal framing to form walls and ceilings; the standard board is 2400 × 1200 mm in 9.5, 12.5 or 15 mm.

SK Trade is a builders' merchant delivering plasterboard into Newark-on-Trent, priced to your postcode and confirmed in writing.

A stack of plasterboard sheets on a pallet with boards fixed to a stud wall behind

Newark-on-Trent delivery at a glance

Daylight
About 7h 33m on the shortest day
How it arrives
Flat on bearers
Delivery
Standard mainland delivery
Delivering to
Newark-on-Trent, Nottinghamshire
Postcode districts
NG24, NG23
Nearby (straight line)
Grantham (13 mi), Arnold (14 mi), Nottingham (16 mi)

What plasterboard can we deliver to Newark-on-Trent?

  • Screws, tape and jointingDrywall screws, scrim and jointing compound.
  • Standard plasterboardWallboard for walls and ceilings in 9.5, 12.5 and 15 mm.
  • Moisture-resistant boardFor bathrooms, kitchens and utility rooms.
  • Acoustic boardDenser board to reduce sound between rooms.
  • Thermal laminate boardPlasterboard bonded to insulation for dry-lining external walls.

Sizing your order

A new 2.4 m partition 2.7 m high, boarded on both sides, is 12.96 m² of board: 5 sheets of 2400 × 1200 mm with 10% for cutting, and about 175 drywall screws. Try the plasterboard calculator

Before your Newark-on-Trent delivery arrives

Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Newark-on-Trent is inside our standard mainland delivery area.

  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
  • If the site is up a shared drive or behind other houses, tell us the distance from the road.
  • Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Plasterboard: choosing well

Which thickness?

12.5 mm is the everyday choice for walls and ceilings on 400 or 600 mm centres; 9.5 mm suits ceilings at 400 mm centres. Fire and acoustic designs may call for 15 mm or two layers.

Which board type?

Use moisture-resistant board in wet rooms, fire board where a fire rating is required, and acoustic board for quieter rooms. Building regulations or your design set the requirement.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

Can plasterboard be stored outside?

No. Keep boards flat, off the ground and dry, ideally inside the building.

Can you deliver plasterboard to a site with restricted access in Newark-on-Trent?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I add other materials to my Newark-on-Trent delivery?

Yes. Put everything on one list, from plasterboard to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many screws per board?

Around 30 to 40 drywall screws for a 2400 × 1200 board on a wall, with screws at about 300 mm centres.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price