Order plasterboard for delivery in Enniskillen

Our plasterboard range for Enniskillen jobs

• Screws, tape and jointingDrywall screws, scrim and jointing compound.
• Tapered and square edgeTapered edge for taped joints; square edge for skimming.
• Thermal laminate boardPlasterboard bonded to insulation for dry-lining external walls.
• Moisture-resistant boardFor bathrooms, kitchens and utility rooms.
• Standard plasterboardWallboard for walls and ceilings in 9.5, 12.5 and 15 mm.

Getting plasterboard onto your Enniskillen site

Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Things to check before you order

Which board type?

Use moisture-resistant board in wet rooms, fire board where a fire rating is required, and acoustic board for quieter rooms. Building regulations or your design set the requirement.

Which thickness?

12.5 mm is the everyday choice for walls and ceilings on 400 or 600 mm centres; 9.5 mm suits ceilings at 400 mm centres. Fire and acoustic designs may call for 15 mm or two layers.

In Northern Ireland building work follows the Building Regulations (Northern Ireland), with guidance in the Technical Booklets, and applications go to the council's building control team.

Working out quantities for your Enniskillen job

A new 2.4 m partition 2.4 m high, boarded on both sides, is 11.52 m² of board: 5 sheets of 2400 × 1200 mm with 10% for cutting, and about 175 drywall screws. Try the plasterboard calculator

Questions about plasterboard delivery in Enniskillen

Is there a minimum order for delivery to Enniskillen?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What thickness plasterboard for walls?

12.5 mm is the standard choice for walls on studs at 400 or 600 mm centres.

Can plasterboard be stored outside?

No. Keep boards flat, off the ground and dry, ideally inside the building.

Do you deliver plasterboard to trades and homeowners in Enniskillen?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.