PIR Insulation Boards delivery in West Midlands

Which PIR insulation boards can you order in West Midlands?

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Flat roof boardsBoards for warm flat roof build-ups.
• Thermal laminate boardsPIR bonded to plasterboard.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.

PIR Insulation Boards delivered in West Midlands towns

• PIR Insulation Boards in Birmingham
• PIR Insulation Boards in Coventry
• PIR Insulation Boards in Wolverhampton
• PIR Insulation Boards in Dudley
• PIR Insulation Boards in Walsall
• PIR Insulation Boards in Solihull
• PIR Insulation Boards in Sutton Coldfield
• PIR Insulation Boards in West Bromwich
• PIR Insulation Boards in Halesowen
• PIR Insulation Boards in Stourbridge
• PIR Insulation Boards in Smethwick
• PIR Insulation Boards in Willenhall
• PIR Insulation Boards in Tipton
• PIR Insulation Boards in Bloxwich
• PIR Insulation Boards in Wednesfield
• PIR Insulation Boards in Aston
• PIR Insulation Boards in Shirley
• PIR Insulation Boards in Brierley Hill
• PIR Insulation Boards in Aldridge
• PIR Insulation Boards in Wednesbury
• PIR Insulation Boards in Kingswinford

A quick quantity check

Insulating 20 m² of rafters, floor or wall takes 8 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Before your West Midlands delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Our standard mainland delivery area covers West Midlands.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• On busy streets in West Midlands, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Getting the right PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards questions

Do you deliver PIR insulation boards to trades and homeowners in West Midlands?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Is there a minimum order for delivery to West Midlands?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Is PIR better than mineral wool?

PIR insulates more per millimetre, so it suits tight spaces. Mineral wool is non-combustible, cheaper per square metre and better for sound.