PIR Insulation Boards for Wednesbury, delivered to site

Choosing from our PIR insulation boards range

• Thermal laminate boardsPIR bonded to plasterboard.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Flat roof boardsBoards for warm flat roof build-ups.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Foil tape and fixingsTo seal joints and fix boards.

Working out quantities for your Wednesbury job

Insulating 24 m² of rafters, floor or wall takes 9 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Before your Wednesbury delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Wednesbury is inside our standard mainland delivery area.

• With roughly 7h 39m of daylight in Wednesbury around the shortest day, morning deliveries leave more working light for the job.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Give us the full postcode for the drop point; deliveries around WS10 are priced to the exact address.

Before you order PIR insulation boards

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

Is there a minimum order for delivery to Wednesbury?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.

Can you deliver PIR insulation boards to a site with restricted access in Wednesbury?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.