Insulation & Drylining
PIR Insulation Boards for Wakefield, delivered to site
PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.
Building in Wakefield? Send us your list and we will come back with a delivered price for the PIR insulation boards and anything else on it.

Wakefield delivery at a glance
- Daylight
- About 7h 26m on the shortest day
- Delivery
- Standard mainland delivery
- How it arrives
- Wrapped packs
- Delivering to
- Wakefield, West Yorkshire
- Nearby (straight line)
- Ossett (3 mi), Dewsbury (5 mi), Morley (6 mi)
- Postcode districts
- WF1, WF2, WF3, WF4
Choosing from our PIR insulation boards range
- Thermal laminate boardsPIR bonded to plasterboard.
- General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
- Foil tape and fixingsTo seal joints and fix boards.
- Flat roof boardsBoards for warm flat roof build-ups.
A quick quantity check
Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator
How delivery works in Wakefield
Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Wakefield is inside our standard mainland delivery area.
- Give us the full postcode for the drop point; deliveries around WF1 are priced to the exact address.
- With roughly 7h 26m of daylight in Wakefield around the shortest day, morning deliveries leave more working light for the job.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
Things to check before you order
Thickness for the U-value
The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.
Sealing joints
Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
PIR Insulation Boards in Wakefield: questions
Can PIR be used in external walls?
In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.
How thick should PIR insulation be?
It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.
Is there a minimum order for delivery to Wakefield?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Do you deliver PIR insulation boards to trades and homeowners in Wakefield?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Other towns near Wakefield
- PIR Insulation Boards in Ossett
- PIR Insulation Boards in Dewsbury
- PIR Insulation Boards in Morley
- PIR Insulation Boards in Batley
- PIR Insulation Boards in Castleford
- PIR Insulation Boards in Darton
More materials delivered to Wakefield
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
