PIR Insulation Boards delivery in Sutton-in-Ashfield

What PIR insulation boards can we deliver to Sutton-in-Ashfield?

• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Foil tape and fixingsTo seal joints and fix boards.

Planning the drop in Sutton-in-Ashfield

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Sutton-in-Ashfield is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Sizing your order

Insulating 24 m² of rafters, floor or wall takes 9 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

PIR Insulation Boards: choosing well

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Ordering PIR insulation boards for Sutton-in-Ashfield: FAQs

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

Do you deliver PIR insulation boards to trades and homeowners in Sutton-in-Ashfield?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to Sutton-in-Ashfield?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.