SK Trade, sktrade.co.uk

Insulation & Drylining

PIR Insulation Boards delivered to Heanor

PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.

Order PIR insulation boards for Heanor with one message: we check the quantities, price the delivery and confirm everything before you pay.

Foil-faced PIR insulation boards stacked beside rafters in a loft conversion

PIR Insulation Boards to Heanor: the basics

How it arrives
Wrapped packs
Postcode districts
DE75, DE7, DE5
Daylight
About 7h 33m on the shortest day
Delivery
Standard mainland delivery
Delivering to
Heanor, Derbyshire
Nearby (straight line)
Ripley (2 mi), Ilkeston (4 mi), Belper (5 mi)

Which PIR insulation boards can you order in Heanor?

  • Cavity wall boardsBoards sized for partial-fill cavity insulation.
  • Foil tape and fixingsTo seal joints and fix boards.
  • Flat roof boardsBoards for warm flat roof build-ups.
  • General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
  • Thermal laminate boardsPIR bonded to plasterboard.

Delivery to Heanor: what helps

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Heanor is inside our standard mainland delivery area.

  • Give us the full postcode for the drop point; deliveries around DE75 are priced to the exact address.
  • Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

How much will you need?

Insulating 20 m² of rafters, floor or wall takes 8 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

PIR Insulation Boards: choosing well

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards in Heanor: questions

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Is there a minimum order for delivery to Heanor?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver PIR insulation boards to a site with restricted access in Heanor?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price