Concrete & Aircrete Blocks for Stenhousemuir, delivered to site

What concrete blocks can we deliver to Stenhousemuir?

• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.

Choosing concrete blocks

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building standards surveyor or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Before your Stenhousemuir delivery arrives

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Stenhousemuir is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Sizing your order

A single-skin block wall in Stenhousemuir 4 m long and 2.4 m high is 9.6 m². At 10 blocks per square metre plus 5% you need 101 blocks, with about 0.14 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Concrete & Aircrete Blocks questions

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

Can I add other materials to my Stenhousemuir delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver concrete blocks to a site with restricted access in Stenhousemuir?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.