PIR Insulation Boards delivered across Moray

PIR Insulation Boards available for Moray delivery

• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Foil tape and fixingsTo seal joints and fix boards.

PIR Insulation Boards delivered in Moray towns

• PIR Insulation Boards in Elgin
• PIR Insulation Boards in Forres
• PIR Insulation Boards in Buckie
• PIR Insulation Boards in Lossiemouth

Working out quantities for your Moray job

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Getting PIR insulation boards onto your Moray site

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Across most of Moray, deliveries are quoted individually because of the distance and access.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

Picking the right product

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

PIR Insulation Boards questions

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

How soon can PIR insulation boards be delivered in Moray?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

Can you deliver PIR insulation boards to a site with restricted access in Moray?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.