PIR Insulation Boards for sites in Angus and Dundee

PIR Insulation Boards available for Angus and Dundee delivery

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Foil tape and fixingsTo seal joints and fix boards.
• Thermal laminate boardsPIR bonded to plasterboard.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Flat roof boardsBoards for warm flat roof build-ups.

PIR Insulation Boards delivered in Angus and Dundee towns

• PIR Insulation Boards in Dundee
• PIR Insulation Boards in Arbroath
• PIR Insulation Boards in Forfar
• PIR Insulation Boards in Montrose
• PIR Insulation Boards in Carnoustie
• PIR Insulation Boards in Monifieth

Sizing your order

Insulating 36 m² of rafters, floor or wall takes 14 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Planning the drop in Angus and Dundee

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Our standard mainland delivery area covers Angus and Dundee.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Things to check before you order

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or the council's building standards service will confirm.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Questions about PIR insulation boards delivery in Angus and Dundee

Can I add other materials to my Angus and Dundee delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.

Can you deliver PIR insulation boards to a site with restricted access in Angus and Dundee?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.