PIR Insulation Boards for sites in Aberdeen and Aberdeenshire

PIR Insulation Boards we supply in Aberdeen and Aberdeenshire

• Foil tape and fixingsTo seal joints and fix boards.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Flat roof boardsBoards for warm flat roof build-ups.
• Thermal laminate boardsPIR bonded to plasterboard.

PIR Insulation Boards delivered in Aberdeen and Aberdeenshire towns

• PIR Insulation Boards in Aberdeen
• PIR Insulation Boards in Peterhead
• PIR Insulation Boards in Inverurie
• PIR Insulation Boards in Fraserburgh
• PIR Insulation Boards in Westhill
• PIR Insulation Boards in Stonehaven

Working out quantities for your Aberdeen and Aberdeenshire job

Insulating 36 m² of rafters, floor or wall takes 14 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

How delivery works in Aberdeen and Aberdeenshire

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Our standard mainland delivery area covers Aberdeen and Aberdeenshire.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• On busy streets in Aberdeen and Aberdeenshire, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Choosing PIR insulation boards

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or the council's building standards service will confirm.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

PIR Insulation Boards questions

Do you deliver PIR insulation boards to trades and homeowners in Aberdeen and Aberdeenshire?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can I add other materials to my Aberdeen and Aberdeenshire delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.