Order PIR insulation boards for delivery in Mitcham

Which PIR insulation boards can you order in Mitcham?

• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.
• Foil tape and fixingsTo seal joints and fix boards.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.

Before your Mitcham delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Mitcham is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• On busy streets in Mitcham, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Quantities: a worked example

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Things to check before you order

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Ordering PIR insulation boards for Mitcham: FAQs

Can you deliver PIR insulation boards to a site with restricted access in Mitcham?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver PIR insulation boards to Mitcham?

Yes. We deliver across Mitcham, including CR4, SW19, SM4, SM6. Mitcham is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.