Insulation & Drylining
Order plaster for delivery in Mitcham
Gypsum plasters are bagged powders mixed with water: undercoats such as bonding and hardwall build up the surface, and finish coats such as multi-finish and board finish give the smooth final skim.
Whether it is a repair, an extension or a new build in Mitcham, we can supply the plaster and deliver to site.

Plaster & Beads to Mitcham: the basics
- Daylight
- About 7h 51m on the shortest day
- Delivering to
- Mitcham, Greater London
- Nearby (straight line)
- Morden (1 mi), Wimbledon (2 mi), Streatham (2 mi)
- How it arrives
- Bags on a pallet
- Delivery
- Standard mainland delivery
- Postcode districts
- CR4, SW19, SM4, SM6
Which plaster can you order in Mitcham?
- Beads, scrim and PVAAngle beads, stop beads, scrim tape and bonding agents.
- One-coat plasterFor patching and small areas in one application.
- Bonding coatUndercoat for low-suction backgrounds and concrete.
- Board finishFinish coat for skimming plasterboard.
Quantities: a worked example
Skimming 50 m² of walls and ceilings at about 2 mm takes around 5 bags of 25 kg finishing plaster, plus angle beads for external corners. Coverage varies with the background, so allow a spare bag.
Delivering plaster in Mitcham
Bags come on a pallet or with a mixed load; keep them dry and off the floor. Mitcham is inside our standard mainland delivery area.
- In summer Mitcham gets around 16h 37m of daylight, but early deliveries still beat the traffic and give the longest working day.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Give us the full postcode for the drop point; deliveries around CR4 are priced to the exact address.
Plaster & Beads: choosing well
Undercoat for the background
Hardwall suits high-suction backgrounds like brick and block; bonding suits low-suction backgrounds like concrete or painted surfaces.
Fresh stock matters
Old plaster sets fast and unevenly. Order it close to when you need it and keep bags dry.
Plaster & Beads in Mitcham: questions
What is the difference between multi-finish and board finish?
Board finish is designed for skimming plasterboard. Multi-finish works on plasterboard and on undercoat plasters, so it is the more flexible choice.
How much plaster do I need to skim a wall?
A 25 kg bag of finishing plaster covers roughly 10 square metres at a 2 mm skim, but coverage varies with the background and thickness. Check the bag.
Is there a minimum order for delivery to Mitcham?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Can you deliver plaster to a site with restricted access in Mitcham?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Also delivering plaster nearby
- Plaster & Beads in Morden
- Plaster & Beads in Wimbledon
- Plaster & Beads in Streatham
- Plaster & Beads in Carshalton
- Plaster & Beads in Wallington
- Plaster & Beads in Croydon
Complete your Mitcham order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
