PIR Insulation Boards delivered to Wimbledon

What PIR insulation boards can we deliver to Wimbledon?

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.

A quick quantity check

Insulating 24 m² of rafters, floor or wall takes 9 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Things to check before you order

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How delivery works in Wimbledon

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Wimbledon is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• With roughly 7h 50m of daylight in Wimbledon around the shortest day, morning deliveries leave more working light for the job.

Questions about PIR insulation boards delivery in Wimbledon

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can you deliver PIR insulation boards to a site with restricted access in Wimbledon?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Wimbledon?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.