Order PIR insulation boards for delivery in Kingston upon Hull

Which PIR insulation boards can you order in Kingston upon Hull?

• Thermal laminate boardsPIR bonded to plasterboard.
• Foil tape and fixingsTo seal joints and fix boards.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.

Working out quantities for your Kingston upon Hull job

Insulating 20 m² of rafters, floor or wall takes 8 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Things to check before you order

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Before your Kingston upon Hull delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Kingston upon Hull is inside our standard mainland delivery area.

• On busy streets in Kingston upon Hull, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

Your questions answered

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Can you deliver PIR insulation boards to a site with restricted access in Kingston upon Hull?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Is there a minimum order for delivery to Kingston upon Hull?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.