PIR Insulation Boards delivery in Goole

Choosing from our PIR insulation boards range

• Flat roof boardsBoards for warm flat roof build-ups.
• Foil tape and fixingsTo seal joints and fix boards.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.

How delivery works in Goole

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Goole is inside our standard mainland delivery area.

• With roughly 7h 26m of daylight in Goole around the shortest day, morning deliveries leave more working light for the job.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Sizing your order

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Getting the right PIR insulation boards

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Ordering PIR insulation boards for Goole: FAQs

Do you deliver PIR insulation boards to Goole?

Yes. We deliver across Goole, including DN14. Goole is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

Do you deliver PIR insulation boards to trades and homeowners in Goole?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.