CLS Studwork Timber delivery in Kingston upon Hull

Our CLS timber range for Kingston upon Hull jobs

• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.

Quantities: a worked example

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Choosing CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Getting CLS timber onto your Kingston upon Hull site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Kingston upon Hull is inside our standard mainland delivery area.

• With roughly 7h 25m of daylight in Kingston upon Hull around the shortest day, morning deliveries leave more working light for the job.
• On busy streets in Kingston upon Hull, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

CLS Studwork Timber questions

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Is there a minimum order for delivery to Kingston upon Hull?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver CLS timber to trades and homeowners in Kingston upon Hull?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.