PIR Insulation Boards delivery in Fort William

Which PIR insulation boards can you order in Fort William?

• Thermal laminate boardsPIR bonded to plasterboard.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.
• Flat roof boardsBoards for warm flat roof build-ups.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.

How much will you need?

Insulating 20 m² of rafters, floor or wall takes 8 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Delivering PIR insulation boards in Fort William

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Fort William is in an area where deliveries are priced individually because of the distance and access, so we quote each order separately.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Things to check before you order

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or the council's building standards service will confirm.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

PIR Insulation Boards questions

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Can you deliver PIR insulation boards to a site with restricted access in Fort William?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Fort William?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.