PIR Insulation Boards delivered to Fleet

Our PIR insulation boards range for Fleet jobs

• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Flat roof boardsBoards for warm flat roof build-ups.
• Foil tape and fixingsTo seal joints and fix boards.

A quick quantity check

Insulating 12 m² of rafters, floor or wall takes 5 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Before you order PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Getting PIR insulation boards onto your Fleet site

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Fleet is inside our standard mainland delivery area.

• On busy streets in Fleet, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Your questions answered

Can I add other materials to my Fleet delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Is there a minimum order for delivery to Fleet?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.