PIR Insulation Boards delivered to Camberley

PIR Insulation Boards available for Camberley delivery

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.
• Foil tape and fixingsTo seal joints and fix boards.

Getting PIR insulation boards onto your Camberley site

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Camberley is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• With roughly 7h 51m of daylight in Camberley around the shortest day, morning deliveries leave more working light for the job.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

How much will you need?

Insulating 45 m² of rafters, floor or wall takes 17 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Before you order PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards in Camberley: questions

Can you deliver PIR insulation boards to a site with restricted access in Camberley?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Do you deliver PIR insulation boards to trades and homeowners in Camberley?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.