PIR Insulation Boards delivered to Ebbw Vale

PIR Insulation Boards available for Ebbw Vale delivery

• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.

PIR Insulation Boards: choosing well

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Wales has its own Approved Documents, including its own Part L for energy efficiency, and building control is handled by the local authority or a registered approver.

Before your Ebbw Vale delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Ebbw Vale is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

How much will you need?

Insulating 12 m² of rafters, floor or wall takes 5 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Questions about PIR insulation boards delivery in Ebbw Vale

Can I add other materials to my Ebbw Vale delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver PIR insulation boards to a site with restricted access in Ebbw Vale?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is PIR better than mineral wool?

PIR insulates more per millimetre, so it suits tight spaces. Mineral wool is non-combustible, cheaper per square metre and better for sound.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.