PIR Insulation Boards delivery in Cambridge

Choosing from our PIR insulation boards range

• Foil tape and fixingsTo seal joints and fix boards.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Flat roof boardsBoards for warm flat roof build-ups.
• Thermal laminate boardsPIR bonded to plasterboard.

How much will you need?

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Planning the drop in Cambridge

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Cambridge is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• On busy streets in Cambridge, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Give us the full postcode for the drop point; deliveries around CB2 are priced to the exact address.

Before you order PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards in Cambridge: questions

Do you deliver PIR insulation boards to Cambridge?

Yes. We deliver across Cambridge, including CB2. Cambridge is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Is there a minimum order for delivery to Cambridge?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.