PIR Insulation Boards delivered to Dundee

PIR Insulation Boards available for Dundee delivery

• Foil tape and fixingsTo seal joints and fix boards.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.

Getting PIR insulation boards onto your Dundee site

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Dundee is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• On busy streets in Dundee, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• With roughly 6h 50m of daylight in Dundee around the shortest day, morning deliveries leave more working light for the job.

Picking the right product

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or the council's building standards service will confirm.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Estimating your PIR insulation boards

Insulating 24 m² of rafters, floor or wall takes 9 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

PIR Insulation Boards in Dundee: questions

Can you deliver PIR insulation boards to a site with restricted access in Dundee?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Dundee?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Is PIR better than mineral wool?

PIR insulates more per millimetre, so it suits tight spaces. Mineral wool is non-combustible, cheaper per square metre and better for sound.