OSB, MDF & Chipboard for sites in Fife

Choosing from our OSB, MDF and chipboard range

• HardboardThin sheets for protection and backing.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.

OSB, MDF & Chipboard delivered in Fife towns

• OSB, MDF & Chipboard in Dunfermline
• OSB, MDF & Chipboard in Kirkcaldy
• OSB, MDF & Chipboard in Glenrothes
• OSB, MDF & Chipboard in St Andrews
• OSB, MDF & Chipboard in Rosyth
• OSB, MDF & Chipboard in Cowdenbeath

Working out quantities for your Fife job

Decking 18 m² with 2440 × 1220 mm sheets takes 7 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 14 boards.

Delivery to Fife: what helps

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Our standard mainland delivery area covers Fife.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Things to check before you order

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

OSB, MDF & Chipboard in Fife: questions

Is there a minimum order for delivery to Fife?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Fife?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.