OSB, MDF & Chipboard for St Andrews, delivered to site

OSB, MDF & Chipboard we supply in St Andrews

• HardboardThin sheets for protection and backing.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.

How delivery works in St Andrews

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. St Andrews is inside our standard mainland delivery area.

• Give us the full postcode for the drop point; deliveries around KY16 are priced to the exact address.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• In summer St Andrews gets around 17h 43m of daylight, but early deliveries still beat the traffic and give the longest working day.

Working out quantities for your St Andrews job

Decking 10 m² with 2440 × 1220 mm sheets takes 4 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 8 boards.

Getting the right OSB, MDF and chipboard

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

OSB, MDF & Chipboard questions

Is there a minimum order for delivery to St Andrews?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

Can I add other materials to my St Andrews delivery?

Yes. Put everything on one list, from OSB, MDF and chipboard to fixings and PPE, and we will price it as one delivery where the products can travel together.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.