OSB, MDF & Chipboard delivered to Carrickfergus

Our OSB, MDF and chipboard range for Carrickfergus jobs

• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.

OSB, MDF & Chipboard: choosing well

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Before your Carrickfergus delivery arrives

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Sizing your order

Decking 30 m² with 2440 × 1220 mm sheets takes 12 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 23 boards.

Questions about OSB, MDF and chipboard delivery in Carrickfergus

Can you deliver OSB, MDF and chipboard to a site with restricted access in Carrickfergus?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Carrickfergus?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.