Cement & Aggregates
MOT Type 1 Sub-base for Canvey Island, delivered to site
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
Need MOT Type 1 on site in Canvey Island? Tell us what you are building and we will work out the quantities and price it delivered.

Delivery facts for Canvey Island
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- South Benfleet (2 mi), Pitsea (4 mi), Rayleigh (5 mi)
- Daylight
- About 7h 49m on the shortest day
- Postcode districts
- SS8, SS7, SS17, SS9
- Delivering to
- Canvey Island, Essex
- How it arrives
- Bulk bags or tipped loads
Choosing from our MOT Type 1 range
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
- ScalpingsCheaper granular fill for less demanding areas.
- Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
Planning the drop in Canvey Island
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Canvey Island is inside our standard mainland delivery area.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
Getting the right MOT Type 1
How deep?
Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.
Virgin or recycled?
Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.
A quick quantity check
A 4 × 5 m area at 150 mm compacted is 3 m³. At about 2.1 tonnes per cubic metre plus 10% that is 6.9 tonnes, or around 9 bulk bags. Try the sub-base calculator
Questions about MOT Type 1 delivery in Canvey Island
Does Type 1 drain?
Type 1 is reasonably free-draining when compacted, which is one reason it is used under drives and patios.
Is there a minimum order for delivery to Canvey Island?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Can you tip it loose?
For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.
Can you deliver MOT Type 1 to a site with restricted access in Canvey Island?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Close to Canvey Island
- MOT Type 1 Sub-base in South Benfleet
- MOT Type 1 Sub-base in Pitsea
- MOT Type 1 Sub-base in Rayleigh
- MOT Type 1 Sub-base in Southend-on-Sea
- MOT Type 1 Sub-base in Basildon
- MOT Type 1 Sub-base in Stanford-le-Hope
Also available in Canvey Island
- Damp Proofing & Membranes in Canvey Island
- Anchors, Bolts & Threaded Rod in Canvey Island
- Planed Timber & Mouldings in Canvey Island
- PIR Insulation Boards in Canvey Island
- OSB, MDF & Chipboard in Canvey Island
- CLS Studwork Timber in Canvey Island
- Cement in Canvey Island
- Joist Hangers & Timber Connectors in Canvey Island
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
