Damp Proofing & Membranes delivery in Nottingham

Which damp proofing can you order in Nottingham?

• Cavity trays and stop endsTo direct water out of the cavity over openings.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.
• Radon barriersGas-resistant membranes for areas that need radon protection.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• DPC rollsPolymer and bitumen damp-proof course in standard wall widths.

Choosing damp proofing

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

Is radon protection needed?

Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; building control will tell you what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Sizing your order

An extension in Nottingham with 16 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 40 m² floor slab needs about 46 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Planning the drop in Nottingham

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Nottingham is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Give us the full postcode for the drop point; deliveries around NG1 are priced to the exact address.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Questions about damp proofing delivery in Nottingham

Is there a minimum order for delivery to Nottingham?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Can I add other materials to my Nottingham delivery?

Yes. Put everything on one list, from damp proofing to fixings and PPE, and we will price it as one delivery where the products can travel together.

Do I need a radon barrier?

It depends on where you are. In radon-affected areas building control requires radon protection in new buildings and extensions.