Order concrete blocks for delivery in South Shields

Which concrete blocks can you order in South Shields?

• Block paving and edgingsOn request alongside your sub-base and sand.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.

Before you order concrete blocks

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Delivery to South Shields: what helps

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. South Shields is inside our standard mainland delivery area.

• Give us the full postcode for the drop point; deliveries around NE33 are priced to the exact address.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

A quick quantity check

A single-skin block wall in South Shields 10 m long and 2.1 m high is 21 m². At 10 blocks per square metre plus 5% you need 221 blocks, with about 0.3 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Your questions answered

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

How soon can concrete blocks be delivered in South Shields?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

Do you deliver concrete blocks to trades and homeowners in South Shields?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.