Concrete & Aircrete Blocks delivery in Hebburn

Concrete & Aircrete Blocks we supply in Hebburn

• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.

Getting concrete blocks onto your Hebburn site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Hebburn is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Give us the full postcode for the drop point; deliveries around NE31 are priced to the exact address.

A quick quantity check

A single-skin block wall in Hebburn 7 m long and 2.1 m high is 14.7 m². At 10 blocks per square metre plus 5% you need 155 blocks, with about 0.21 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Choosing concrete blocks

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Ordering concrete blocks for Hebburn: FAQs

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

Do you deliver concrete blocks to trades and homeowners in Hebburn?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to Hebburn?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.