SK Trade, sktrade.co.uk

Building Materials

Order concrete blocks for delivery in Scone

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

Trades and homeowners in Scone can order concrete blocks for delivery by sending a list, a drawing or just the sizes of the job.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Scone delivery at a glance

Nearby (straight line)
Perth (2 mi), Blairgowrie (12 mi), Auchterarder (14 mi)
How it arrives
Banded pallets, usually crane offload
Delivery
Standard mainland delivery
Postcode districts
PH2, PH1
Daylight
About 6h 51m on the shortest day
Delivering to
Scone (Perth and Kinross)

Choosing from our concrete blocks range

  • Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
  • Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
  • Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
  • Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.

Getting concrete blocks onto your Scone site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Scone is inside our standard mainland delivery area.

  • Give us the full postcode for the drop point; deliveries around PH2 are priced to the exact address.
  • Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
  • Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Working out quantities for your Scone job

A single-skin block wall in Scone 10 m long and 2.4 m high is 24 m². At 10 blocks per square metre plus 5% you need 252 blocks, with about 0.35 tonnes of building sand and 4 bags of cement for the mortar at 1:4. Try the block calculator

Before you order concrete blocks

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Concrete & Aircrete Blocks in Scone: questions

Do you deliver concrete blocks to Scone?

Yes. We deliver across Scone, including PH2, PH1. Scone is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is there a minimum order for delivery to Scone?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

Are aircrete blocks strong enough for an extension?

Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price