Concrete & Aircrete Blocks delivery in Blairgowrie

Concrete & Aircrete Blocks available for Blairgowrie delivery

• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Block paving and edgingsOn request alongside your sub-base and sand.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.

Delivering concrete blocks in Blairgowrie

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Blairgowrie is inside our standard mainland delivery area.

• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Estimating your concrete blocks

A single-skin block wall in Blairgowrie 10 m long and 2.4 m high is 24 m². At 10 blocks per square metre plus 5% you need 252 blocks, with about 0.35 tonnes of building sand and 4 bags of cement for the mortar at 1:4. Try the block calculator

Concrete & Aircrete Blocks: choosing well

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Common questions from Blairgowrie

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Can I add other materials to my Blairgowrie delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Are aircrete blocks strong enough for an extension?

Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.

Is there a minimum order for delivery to Blairgowrie?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.