SK Trade, sktrade.co.uk

Building Materials

Concrete & Aircrete Blocks delivery in Dundee

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

Trades and homeowners in Dundee can order concrete blocks for delivery by sending a list, a drawing or just the sizes of the job.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Dundee delivery at a glance

Daylight
About 6h 50m on the shortest day
Delivering to
Dundee (Angus and Dundee)
Nearby (straight line)
Monifieth (6 mi), Carnoustie (11 mi), St Andrews (11 mi)
Delivery
Standard mainland delivery
Postcode districts
DD1, DD4, DD2
How it arrives
Banded pallets, usually crane offload

Concrete & Aircrete Blocks available for Dundee delivery

  • Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
  • Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
  • Block paving and edgingsOn request alongside your sub-base and sand.
  • Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.

Before your Dundee delivery arrives

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Dundee is inside our standard mainland delivery area.

  • With roughly 6h 50m of daylight in Dundee around the shortest day, morning deliveries leave more working light for the job.
  • Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
  • If the site is up a shared drive or behind other houses, tell us the distance from the road.

Things to check before you order

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building standards surveyor or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Sizing your order

A single-skin block wall in Dundee 7 m long and 2.7 m high is 18.9 m². At 10 blocks per square metre plus 5% you need 199 blocks, with about 0.27 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Your questions answered

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Do you deliver concrete blocks to Dundee?

Yes. We deliver across Dundee, including DD1, DD4, DD2. Dundee is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

Is there a minimum order for delivery to Dundee?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price