Concrete & Aircrete Blocks delivery in Montrose

Choosing from our concrete blocks range

• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.

Choosing concrete blocks

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building standards surveyor or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Getting concrete blocks onto your Montrose site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Montrose is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

A quick quantity check

A single-skin block wall in Montrose 4 m long and 2.4 m high is 9.6 m². At 10 blocks per square metre plus 5% you need 101 blocks, with about 0.14 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Ordering concrete blocks for Montrose: FAQs

Do you deliver concrete blocks to trades and homeowners in Montrose?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

Are aircrete blocks strong enough for an extension?

Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.

Is there a minimum order for delivery to Montrose?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.