Concrete & Aircrete Blocks for Arbroath, delivered to site

Which concrete blocks can you order in Arbroath?

• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Block paving and edgingsOn request alongside your sub-base and sand.

A quick quantity check

A single-skin block wall in Arbroath 8 m long and 2.1 m high is 16.8 m². At 10 blocks per square metre plus 5% you need 177 blocks, with about 0.24 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Before you order concrete blocks

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building standards surveyor or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Getting concrete blocks onto your Arbroath site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Arbroath is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• In summer Arbroath gets around 17h 46m of daylight, but early deliveries still beat the traffic and give the longest working day.

Common questions from Arbroath

How soon can concrete blocks be delivered in Arbroath?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Can you deliver concrete blocks to a site with restricted access in Arbroath?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.