Concrete & Aircrete Blocks for Hayes, delivered to site

Which concrete blocks can you order in Hayes?

• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.

How delivery works in Hayes

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Hayes is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• In summer Hayes gets around 16h 38m of daylight, but early deliveries still beat the traffic and give the longest working day.

Things to check before you order

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Working out quantities for your Hayes job

A single-skin block wall in Hayes 6 m long and 2.4 m high is 14.4 m². At 10 blocks per square metre plus 5% you need 152 blocks, with about 0.21 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Questions about concrete blocks delivery in Hayes

Is there a minimum order for delivery to Hayes?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

Can you deliver concrete blocks to a site with restricted access in Hayes?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.