Building Materials
Concrete & Aircrete Blocks delivery in Southall
Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.
Trades and homeowners in Southall can order concrete blocks for delivery by sending a list, a drawing or just the sizes of the job.

Your Southall delivery
- Delivery
- Standard mainland delivery
- Delivering to
- Southall, Greater London
- Daylight
- About 7h 49m on the shortest day
- Nearby (straight line)
- Greenford (2 mi), Heston (2 mi), Hayes (2 mi)
- Postcode districts
- UB1, UB2
- How it arrives
- Banded pallets, usually crane offload
Concrete & Aircrete Blocks we supply in Southall
- Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
- Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
- Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
- Block paving and edgingsOn request alongside your sub-base and sand.
- Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
How delivery works in Southall
Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Southall is inside our standard mainland delivery area.
- If neighbours share the access, it helps to let them know a lorry is coming.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
Working out quantities for your Southall job
A single-skin block wall in Southall 8 m long and 2.1 m high is 16.8 m². At 10 blocks per square metre plus 5% you need 177 blocks, with about 0.24 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator
Concrete & Aircrete Blocks: choosing well
Handling heavy blocks
Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.
What strength do I need?
Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Your questions answered
Is there a minimum order for delivery to Southall?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Can I add other materials to my Southall delivery?
Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.
Are aircrete blocks strong enough for an extension?
Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.
How much mortar for blockwork?
Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.
Other towns near Southall
- Concrete & Aircrete Blocks in Greenford
- Concrete & Aircrete Blocks in Heston
- Concrete & Aircrete Blocks in Hayes
- Concrete & Aircrete Blocks in Isleworth
- Concrete & Aircrete Blocks in Northolt
- Concrete & Aircrete Blocks in Hounslow
Add to your Southall delivery
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
