Building Materials
Order concrete blocks for delivery in Bury
Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.
SK Trade is a builders' merchant delivering concrete blocks into Bury, priced to your postcode and confirmed in writing.

Concrete & Aircrete Blocks to Bury: the basics
- Daylight
- About 7h 27m on the shortest day
- Delivering to
- Bury, Greater Manchester
- Postcode districts
- BL9, BL8, OL10, BL0
- How it arrives
- Banded pallets, usually crane offload
- Nearby (straight line)
- Radcliffe (3 mi), Heywood (3 mi), Whitefield (3 mi)
- Delivery
- Standard mainland delivery
Choosing from our concrete blocks range
- Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
- Block paving and edgingsOn request alongside your sub-base and sand.
- Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
- Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
- Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
Planning the drop in Bury
Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Bury is inside our standard mainland delivery area.
- Give us the full postcode for the drop point; deliveries around BL9 are priced to the exact address.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
- With roughly 7h 27m of daylight in Bury around the shortest day, morning deliveries leave more working light for the job.
Getting the right concrete blocks
Thickness
100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.
What strength do I need?
Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Quantities: a worked example
A single-skin block wall in Bury 7 m long and 2.1 m high is 14.7 m². At 10 blocks per square metre plus 5% you need 155 blocks, with about 0.21 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator
Concrete & Aircrete Blocks questions
How many blocks on a pallet?
It varies with the block size and maker. We confirm the pallet quantity with your price.
Is there a minimum order for delivery to Bury?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
What is the difference between 3.6 and 7.3 N/mm² blocks?
The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.
Do you deliver concrete blocks to trades and homeowners in Bury?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Also delivering concrete blocks nearby
- Concrete & Aircrete Blocks in Radcliffe
- Concrete & Aircrete Blocks in Heywood
- Concrete & Aircrete Blocks in Whitefield
- Concrete & Aircrete Blocks in Prestwich
- Concrete & Aircrete Blocks in Middleton
- Concrete & Aircrete Blocks in Farnworth
Other materials for Bury sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
