Building Materials
Concrete & Aircrete Blocks for Bridgwater, delivered to site
Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.
Trades and homeowners in Bridgwater can order concrete blocks for delivery by sending a list, a drawing or just the sizes of the job.

Bridgwater delivery at a glance
- Nearby (straight line)
- Burnham-on-Sea (8 mi), Taunton (9 mi), Weston-super-Mare (15 mi)
- How it arrives
- Banded pallets, usually crane offload
- Delivery
- Standard mainland delivery
- Delivering to
- Bridgwater, Somerset
- Postcode districts
- TA6, TA5, TA7
- Daylight
- About 7h 53m on the shortest day
Concrete & Aircrete Blocks available for Bridgwater delivery
- Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
- Block paving and edgingsOn request alongside your sub-base and sand.
- Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
- Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
- Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
Choosing concrete blocks
Thickness
100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.
Handling heavy blocks
Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Getting concrete blocks onto your Bridgwater site
Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Bridgwater is inside our standard mainland delivery area.
- Give us the full postcode for the drop point; deliveries around TA6 are priced to the exact address.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
Estimating your concrete blocks
A single-skin block wall in Bridgwater 5 m long and 2.7 m high is 13.5 m². At 10 blocks per square metre plus 5% you need 142 blocks, with about 0.2 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator
Ordering concrete blocks for Bridgwater: FAQs
Is there a minimum order for delivery to Bridgwater?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
How many blocks on a pallet?
It varies with the block size and maker. We confirm the pallet quantity with your price.
Are aircrete blocks strong enough for an extension?
Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.
Can you deliver concrete blocks to a site with restricted access in Bridgwater?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Also delivering concrete blocks nearby
- Concrete & Aircrete Blocks in Burnham-on-Sea
- Concrete & Aircrete Blocks in Taunton
- Concrete & Aircrete Blocks in Weston-super-Mare
- Concrete & Aircrete Blocks in Yeovil
- Concrete & Aircrete Blocks in Barry
- Concrete & Aircrete Blocks in Clevedon
More materials delivered to Bridgwater
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
