Concrete & Aircrete Blocks delivered to Bathgate

Concrete & Aircrete Blocks available for Bathgate delivery

• Block paving and edgingsOn request alongside your sub-base and sand.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.

Concrete & Aircrete Blocks: choosing well

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building standards surveyor or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Estimating your concrete blocks

A single-skin block wall in Bathgate 9 m long and 2.4 m high is 21.6 m². At 10 blocks per square metre plus 5% you need 227 blocks, with about 0.31 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

How delivery works in Bathgate

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Bathgate is inside our standard mainland delivery area.

• With roughly 6h 58m of daylight in Bathgate around the shortest day, morning deliveries leave more working light for the job.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• If neighbours share the access, it helps to let them know a lorry is coming.

Questions about concrete blocks delivery in Bathgate

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Is there a minimum order for delivery to Bathgate?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

Can you deliver concrete blocks to a site with restricted access in Bathgate?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.