Concrete & Aircrete Blocks delivered to Livingston

Which concrete blocks can you order in Livingston?

• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Block paving and edgingsOn request alongside your sub-base and sand.

Getting the right concrete blocks

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building standards surveyor or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

How much will you need?

A single-skin block wall in Livingston 4 m long and 2.1 m high is 8.4 m². At 10 blocks per square metre plus 5% you need 89 blocks, with about 0.12 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

How delivery works in Livingston

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Livingston is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Give us the full postcode for the drop point; deliveries around EH54 are priced to the exact address.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Concrete & Aircrete Blocks questions

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Do you deliver concrete blocks to Livingston?

Yes. We deliver across Livingston, including EH54, EH53, EH52. Livingston is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is there a minimum order for delivery to Livingston?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.