SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber delivered to Whitstable

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Need CLS timber on site in Whitstable? Tell us what you are building and we will work out the quantities and price it delivered.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Delivery facts for Whitstable

Nearby (straight line)
Herne Bay (5 mi), Canterbury (6 mi), Faversham (7 mi)
Delivering to
Whitstable, Kent
How it arrives
Bundles with your boards
Postcode districts
CT5, CT2, ME13, CT6
Daylight
About 7h 51m on the shortest day
Delivery
Standard mainland delivery

What CLS timber can we deliver to Whitstable?

  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • FixingsScrews, nails and frame fixings to suit.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Before your Whitstable delivery arrives

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Whitstable is inside our standard mainland delivery area.

  • Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
  • If the site is up a shared drive or behind other houses, tell us the distance from the road.
  • In summer Whitstable gets around 16h 37m of daylight, but early deliveries still beat the traffic and give the longest working day.

Getting the right CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Sizing your order

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Common questions from Whitstable

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Do you deliver CLS timber to Whitstable?

Yes. We deliver across Whitstable, including CT5, CT2, ME13, CT6. Whitstable is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can you deliver CLS timber to a site with restricted access in Whitstable?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price