Timber & Sheets
CLS Studwork Timber delivered to Thornton-Cleveleys
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Whether it is a repair, an extension or a new build in Thornton-Cleveleys, we can supply the CLS timber and deliver to site.

Delivery facts for Thornton-Cleveleys
- Postcode districts
- FY5, FY2, FY6
- Daylight
- About 7h 24m on the shortest day
- Nearby (straight line)
- Fleetwood (4 mi), Blackpool (4 mi), Lytham St Annes (9 mi)
- Delivery
- Standard mainland delivery
- Delivering to
- Thornton-Cleveleys, Lancashire
- How it arrives
- Bundles with your boards
Which CLS timber can you order in Thornton-Cleveleys?
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- FixingsScrews, nails and frame fixings to suit.
A quick quantity check
A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
How delivery works in Thornton-Cleveleys
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Thornton-Cleveleys is inside our standard mainland delivery area.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
Choosing CLS timber
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Ordering CLS timber for Thornton-Cleveleys: FAQs
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Do you deliver CLS timber to Thornton-Cleveleys?
Yes. We deliver across Thornton-Cleveleys, including FY5, FY2, FY6. Thornton-Cleveleys is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Is there a minimum order for delivery to Thornton-Cleveleys?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Nearby towns we deliver CLS timber to
- CLS Studwork Timber in Fleetwood
- CLS Studwork Timber in Blackpool
- CLS Studwork Timber in Lytham St Annes
- CLS Studwork Timber in Morecambe
- CLS Studwork Timber in Lancaster
- CLS Studwork Timber in Preston
Complete your Thornton-Cleveleys order
- Damp Proofing & Membranes in Thornton-Cleveleys
- Bagged Concrete & Mortar Mixes in Thornton-Cleveleys
- Anchors, Bolts & Threaded Rod in Thornton-Cleveleys
- PIR Insulation Boards in Thornton-Cleveleys
- MOT Type 1 Sub-base in Thornton-Cleveleys
- Metal Stud & Ceiling Systems in Thornton-Cleveleys
- Treated Carcassing Timber in Thornton-Cleveleys
- Ballast & Gravel in Thornton-Cleveleys
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
