CLS Studwork Timber for Lytham St Annes, delivered to site

Choosing from our CLS timber range

• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Things to check before you order

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Working out quantities for your Lytham St Annes job

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

How delivery works in Lytham St Annes

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Lytham St Annes is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Questions about CLS timber delivery in Lytham St Annes

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Do you deliver CLS timber to trades and homeowners in Lytham St Annes?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to Lytham St Annes?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.