CLS Studwork Timber delivery in Stanford-le-Hope

What CLS timber can we deliver to Stanford-le-Hope?

• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• Noggins and head platesCut from the same stock.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.

Things to check before you order

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Working out quantities for your Stanford-le-Hope job

A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Planning the drop in Stanford-le-Hope

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Stanford-le-Hope is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Give us the full postcode for the drop point; deliveries around SS17 are priced to the exact address.

Common questions from Stanford-le-Hope

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

Is there a minimum order for delivery to Stanford-le-Hope?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Stanford-le-Hope delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.