CLS Studwork Timber for sites in Shropshire

Which CLS timber can you order in Shropshire?

• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

CLS Studwork Timber delivered in Shropshire towns

• CLS Studwork Timber in Telford
• CLS Studwork Timber in Shrewsbury
• CLS Studwork Timber in Wellington
• CLS Studwork Timber in Oswestry

Sizing your order

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

How delivery works in Shropshire

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers Shropshire.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Getting the right CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

CLS Studwork Timber questions

Can you deliver CLS timber to a site with restricted access in Shropshire?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I add other materials to my Shropshire delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.