CLS Studwork Timber delivered across Cheshire

CLS Studwork Timber we supply in Cheshire

• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

CLS Studwork Timber delivered in Cheshire towns

• CLS Studwork Timber in Warrington
• CLS Studwork Timber in Chester
• CLS Studwork Timber in Crewe
• CLS Studwork Timber in Ellesmere Port
• CLS Studwork Timber in Widnes
• CLS Studwork Timber in Runcorn
• CLS Studwork Timber in Macclesfield
• CLS Studwork Timber in Northwich
• CLS Studwork Timber in Winsford
• CLS Studwork Timber in Congleton
• CLS Studwork Timber in Wilmslow

How much will you need?

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivery to Cheshire: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers Cheshire.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Give us the full postcode for the drop point; deliveries around WA are priced to the exact address.

Picking the right product

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Ordering CLS timber for Cheshire: FAQs

How soon can CLS timber be delivered in Cheshire?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Is there a minimum order for delivery to Cheshire?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.